YASKAWA
Home >> Price >> YASKAWA >> YASKAWA SGMJV-01AAA2S Price
Brand sort

YASKAWA YASKAWA SGMJV-01AAA2S Price

Brand: YASKAWA
Country:
Name: Middle inertia rotary servo motor
Price: 0
YASKAWA SGMJV-01AAA2S
Sigma -V series servo motor SGMSV.
Rated output: 3.0kw.
Power supply voltage: AC200V.
Serial encoder: 20 bit absolute value type (standard).
Design sequence: standard.
Shaft end: straight shaft with keyway, with screw (optional).
Optional: with hold brake (DC90V).
Super power rate.
Variety is complete (1.0kW ~ 7.0kW, with hold brake).
Equipped with a high resolution serial encoder (20 bit).
Standard using IP67 (7 SGMJV-01AAA2S0kw for IP22).
Use example:
Placement machine.
Punch printed circuit board.
Machine tool feeding device.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resistance grade: F.
Insulation withstand voltage: AC1500V 1 minutes (200V), AC1800V 1 minutes (400V).
Protection mode: fully enclosed self cooling type IP67 (except shaft through part).
The use of environmental humidity: 20 ~ 80% (not dew).
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotationHigh performance, use the best type of servo unit (high performance).
Maximum applicable motor capacity: 2.0kw.
Power supply voltage: three phase AC200V.
Design sequence: A.
Hardware specification: base mounting type (standard).
Interface: MECHATROLINK-III communication command type (linear servo motor).
Function: no deviation standard.
High performance sigma shaped -V-EX series.
2 models of high performance servo unit.
EX001 (support M- III high speed communication): the communication cycle is the minimum value of 125 s, which makes the response of the instruction becomes faster, and the track accuracy and processing ability are improved.
EX002 (no deviation of the specification): greatly improve the command tracking performance, and further improve the accuracy of trajectory control. Large capacity SGMVV type servo motor.
Rated output: 37KW.
Voltage: three phase AC400V.
Serial encoder: 20 bit absolute value type.
Rated speed: 1500r\/min.
The main mechanical structure: flange type, straight shaft (with keyway and screw).
Optional parts: with hold brake (DC24V), with oil seal.
The use of small, low inertia servo motor, also can give full play to the strength of the mechanical properties.
The new model SGMVV with a rated output of 22~55KW, the amount of passenger speed 800r\/min and 1500r\/min products.
After the motor is installed, the phase is started to run immediately.
Even if the servo is not adjusted, as long as the moment of inertia is within the allowable range,
Even if the load changes, it can be driven stably, and the vibration will not happen
SGMJV-01AAA2S Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=SGMJV-01AAA2S&select=5


...more relevant model market price >>>>
Related products
Yaskawa
Middle inertia rotary servo motor
SGMJV-04AAA2S
Yaskawa Middle inertia rotary servo motor SGMJV-04AAA2S
Sigma -V series servo motor SGMJV. Rated
Yaskawa
Middle inertia rotary servo motor
SGMJV-06AAAB1
Yaskawa Middle inertia rotary servo motor SGMJV-06AAAB1
Sigma -V series servo motor SGMJV. Rated
Yaskawa
Middle inertia rotary servo motor
SGMJV-08A3AB1
Yaskawa Middle inertia rotary servo motor SGMJV-08A3AB1
Sigma -V series servo motor SGMJV. Rated
Yaskawa
Middle inertia rotary servo motor
SGMJV-08ADAB1
Yaskawa Middle inertia rotary servo motor SGMJV-08ADAB1
Sigma -V series servo motor SGMJV. Rated
Related download