YASKAWA
Home >> Price >> YASKAWA >> YASKAWA SGMAV-10A3A6S Price
Brand sort

YASKAWA YASKAWA SGMAV-10A3A6S Price

Brand: YASKAWA
Country:
Name: Ultra low inertia servo motor
Price: 0
YASKAWA SGMAV-10A3A6S
Sigma -V series servo motor SGMSV.
Rated output: 2.0kw.
Power supply voltage: AC400V.
Serial encoder: 20 bit Delta (standard).
Design sequence: standard.
Shaft end: straight shaft, without keyway (standard).
Optional: with oil seal.
Super power rate.
Variety is complete (1.0kW ~ 7.0kW, with hold brake).
Equipped with a high resolution serial encoder (20 bit).
Standard using IP67 (7.0kw for IP22).
Use example:
Placement machine SGMAV-10A3A6S
Punch printed circuit board.
Machine tool feeding device.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resistance grade: F.
Insulation withstand voltage: AC1500V 1 minutes (200V), AC1800V 1 minutes (400V).
Protection mode: fully enclosed self cooling type IP67 (except shaft through part).
The use of environmental humidity: 20 ~ 80% (not dew).
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotationServo motor SGMGH type.
Rated speed: 1500r\/min.
Power: 1.3kw.
Power supply voltage: three phase AC200V.
Serial encoder: 17 bit relative value.
Design sequence: high precision machine tool.
Shaft end: straight shaft without key.
Optional parts: with oil seal, DC24V brake.
High speed feed series: high speed running when no load.
Complete separation of the main circuit and the control circuit,
Alarm can only turn off the main circuit power supply, easy to maintain.
Parameter setting device.
The parameters can be directly entered by the servo drive body.
Saving wiring.
Using a serial encoder, encoder wiring number than the original product reduced by 1\/2.
Multi in one control: the use of the parameters of the switch can not use the torque, position, speed controlEquipped with INDEXER functional type servo unit (kit type).
Maximum applicable motor capacity: 3.0kw.
Power supply voltage: three phase AC400V.
Interface: instruction selection and installation (rotary type servo motor).
Matching (hardware): paint.
Matching (software): standard.
Matching (parameter): standard.
Optional module: INDEXER+ full closed loop module.
Simple.
By programming and serial programming, easy implementation of motion control.
Can also be installed through the Windows environment support tool (SigmaWin+) easy to start.
The I/O module can be connected with the upper controller simply.
Smart.
To support the operation of the main purpose of the positioning operation based on the program table.
The maximum number of programmable positioning points to 256 points.
With external positioning, JOG speed table operation, the origin of reversion, rich features such as programmable signal output.
I/O points for the input: 19 points, output: 16 points.
Speedy.
High speed and high precision positioning by combining with high performance V series.
Motion control can be realized without using motion controller.
SGMAV-10A3A6S Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=SGMAV-10A3A6S&select=5


...more relevant model market price >>>>
Related products
Yaskawa
Ultra low inertia servo motor
SGMAV-04A3A6C
Yaskawa Ultra low inertia servo motor SGMAV-04A3A6C
Sigma -V series servo motor SGMAV. Rated
Yaskawa
Ultra low inertia servo motor
SGMAV-01ADA2E
Yaskawa Ultra low inertia servo motor SGMAV-01ADA2E
Sigma -V series servo motor SGMAV. Rated
Yaskawa
Ultra low inertia servo motor
SGMAV-A5ADA61
Yaskawa Ultra low inertia servo motor SGMAV-A5ADA61
Sigma -V series servo motor SGMAV. Rated
Yaskawa
Ultra low inertia servo motor
SGMAV-C2ADA2E
Yaskawa Ultra low inertia servo motor SGMAV-C2ADA2E
Sigma -V series servo motor SGMAV. Rated