YASKAWA
Home >> Price >> YASKAWA >> YASKAWA SGMCS-17E3B41 Price
Brand sort

YASKAWA YASKAWA SGMCS-17E3B41 Price

Brand: YASKAWA
Country:
Name: Direct drive servo motor
Price: 0
YASKAWA SGMCS-17E3B41
Sigma -v series servo unit SGDV.
Maximum applicable motor capacity: 3kw.
Power supply voltage: three phase AC200V.
Design sequence: A type.
Interface: MECHATROLINK- III communication command type (rotary servo motor).
Matching (hardware): base mounting type (standard).
Realize real time communication
With the maximum transmission speed of 100Mbps and the set of communication cycle 125S ~ 4ms, to achieve a more than 62 stations of the high speed control SGMCS-17E3B41
Through the high speed of communication, can send and receive all kinds of control information in real time.
Contribute to cost savings
A maximum of 62 stations can be connected to the communication line, can significantly reduce wiring costs and time.
The command connector of the upper controller only needs 1,
Pulse generator for D/A converter or position instruction without speed / torque command.
High precision motion control is realized.
In addition to torque, position and speed control, but also to achieve high precision synchronization phase control.
Because the control mode can be switched on line, the complicated mechanical action can be realized more effectively and smoothly.Sigma -V series servo motor SGMSV.
Rated output: 4.0kw.
Power supply voltage: AC200V.
Serial encoder: 20 bit Delta (standard).
Design sequence: standard.
Shaft end: straight shaft, without keyway (standard).
Optional: no matching.
Super power rate.
Variety is complete (1.0kW ~ 7.0kW, with hold brake).
Equipped with a high resolution serial encoder (20 bit).
Standard using IP67 (7.0kw for IP22).
Use example:
Placement machine.
Punch printed circuit board.
Machine tool feeding device.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resistance grade: F.
Insulation withstand voltage: AC1500V 1 minutes (200V), AC1800V 1 minutes (400V).
Protection mode: fully enclosed self cooling type IP67 (except shaft through part).
The use of environmental humidity: 20 ~ 80% (not dew).
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotation
SGMCS-17E3B41 Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=SGMCS-17E3B41&select=5


...more relevant model market price >>>>
Related products
Yaskawa
Direct drive servo motor
SGMCS-10DDC41
Yaskawa Direct drive servo motor SGMCS-10DDC41
SGMCS small capacity type of direct driv
Yaskawa
Direct drive servo motor
SGMCS-14NDA11
Yaskawa Direct drive servo motor SGMCS-14NDA11
SGMCS small capacity type of direct driv
Yaskawa
Direct drive servo motor
SGMCS-1EC3C41
Yaskawa Direct drive servo motor SGMCS-1EC3C41
Capacity type of direct drive servo moto
Yaskawa
Direct drive servo motor
SGMCS-35B3C41
Yaskawa Direct drive servo motor SGMCS-35B3C41
SGMCS small capacity type of direct driv