YASKAWA
Home >> Download >> Yaskawa >> Manual Download >> SGM7P-15AFAH101 Installation Guide ()

SGM7P-15AFAH101 Installation Guide ()

Brand: Yaskawa
Product model: SGM7P-15AFAH101
Name: HMI
Sort: Installation Guide
File language: English
File size: 21.92MB
Sigma -V series servo motor SGMGV.
Rated output: 850W (0.85kw).
Power supply voltage: AC400V.
Serial encoder: 20 bit absolute value type (standard).
Design sequence: Standard (bolt for silver).
Shaft end: straight shaft with keyway, with screw (optional).
Optional: with oil seal.
A variety of mechanical feed shaft drive (high speed feed) SGM7P-15AFAH101 Installation Guide.
Variety is complete (300W ~ 15kW, with hold brake) SGM7P-15AFAH101
Equipped with a high resolution serial encoder (20 bit).
Standard using IP67.
Use example:
Machine tool。
Transport machinery.
Handling machinery。
Food processing machinery.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C SGM7P-15AFAH101 Installation Guide.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resistance grade: F.
Insulation withstand voltage: AC1500V 1 minutes (200V), AC1800V 1 minutes (400V).
Protection mode: fully enclosed self cooling type IP67 (except shaft through part).
The use of environmental humidity: 20 ~ 80% (not dew).
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotationLarge capacity SGMVV type servo motor SGM7P-15AFAH101 Installation Guide.
Rated output: 37KW.
Voltage: three phase AC400V.
Serial encoder: 20 bit delta.
Rated speed: 800r\/min.
The main mechanical structure: support mounting type, straight shaft (with keyway and screw).
Optional parts: with hold brake (DC90V).
The use of small, low inertia servo motor, also can give full play to the strength of the mechanical properties.
The new model SGMVV with a rated output of 22~55KW, the amount of passenger speed 800r\/min and 1500r\/min products.
After the motor is installed, the phase is started to run immediately.
Even if the servo is not adjusted, as long as the moment of inertia is within the allowable range,
Even if the load changes, it can be driven stably, and the vibration will not happenSigma -V series servo motor SGMSV.
Rated output: 2.5kw.
Power supply voltage: AC400V.
Serial encoder: 20 bit absolute value type (standard).
Design sequence: standard.
Shaft end: straight shaft, without keyway (standard).
Optional: no matching.
Super power rate.
Variety is complete (1.0kW ~ 7.0kW, with hold brake).
Equipped with a high resolution serial encoder (20 bit).
Standard using IP67 (7.0kw for IP22).
Use example:
Placement machine.
Punch printed circuit board.
Machine tool feeding device.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resisstance grade: F SGM7P-15AFAH101 Manual.
Insulation withstand voltage: AC1500V 1 minutes (200V), AC1800V 1 minutes (400V).
Protection mode: fully enclosed self cooling type IP67 (except shaft through part).
The use of environmental humidity: 20 ~ 80%% (not dew) SGM7P-15AFAH101 Manual.
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotation
Related products
Yaskawa
Servo motor with speed reducer
SGM7P-15A7AHB21
Yaskawa Servo motor with speed reducer SGM7P-15A7AHB21
SGM7P type rated speed: 3000r\/min of inert
Yaskawa
Medium inertia, flat servo motor
SGM7P-15AFA2C
Yaskawa Medium inertia, flat servo motor SGM7P-15AFA2C
SGM7P type rated speed: 3000r\/min of inert
Yaskawa
Servo motor with speed reducer
SGM7P-15A7AHB01
Yaskawa Servo motor with speed reducer SGM7P-15A7AHB01
SGM7P type rated speed: 3000r/min of inerti
Yaskawa
Servo motor with speed reducer
SGM7P-15AFAH10C
Yaskawa Servo motor with speed reducer SGM7P-15AFAH10C
SGM7P type rated speed: 3000r\/min of inert