YASKAWA
Home >> Download >> Yaskawa >> Manual Download >> SGM7P-15A7AHC2C User's Manual ()

SGM7P-15A7AHC2C User's Manual ()

Brand: Yaskawa
Product model: SGM7P-15A7AHC2C
Name: Calculating Unit
Sort: User's Manual
File language: English
File size: 21.92MB
Sigma -V series servo motor SGMGV.
Rated output: 300W (0.3kw).
Power supply voltage: AC200V.
Serial encoder: 20 bit absolute value type (standard).
Design sequence: Standard (bolt for silver).
Shaft end: straight shaft, without keyway (standard).
Optional: no matching.
A variety of mechanical feed shaft drive (high speed feed) SGM7P-15A7AHC2C User's Manual.
Variety is complete (300W ~ 15kW, with hold brake) SGM7P-15A7AHC2C
Equipped with a high resolution serial encoder (20 bit).
Standard using IP67.
Use example:
Machine tool。
Transport machinery.
Handling machinery。
Food processing machinery.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C SGM7P-15A7AHC2C User's Manual.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resistance grade: F.
Insulation withstand voltage: AC1500V 1 minutes (200V), AC1800V 1 minutes (400V).
Protection mode: fully enclosed self cooling type IP67 (except shaft through part).
The use of environmental humidity: 20 ~ 80% (not dew).
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotationHigh performance, use the best type of servo unit (high performance) SGM7P-15A7AHC2C User's Manual.
Maximum applicable motor capacity: 0.2kw.
Power supply voltage: single phase AC100V.
Design sequence: A.
Hardware specifications: paint.
Interface: MECHATROLINK-III communication command type (linear servo motor).
Function: support 125 s communication cycle.
High performance sigma shaped -V-EX series.
2 models of high performance servo unit.
EX001 (support M- III high speed communication): the communication cycle is the minimum value of 125 s, which makes the response of the instruction becomes faster, and the track accuracy and processing ability are improved.
EX002 (no deviation of the specification): greatly improve the command tracking performance, and further improve the accuracy of trajectory control. Servo motor SGMGH type.
Rated speed: 1500r\/min.
Power: 5.5kw.
Power supply voltage: three phase AC200V.
Serial encoder: 17 bit relative value.
Design sequence: A.
Shaft end: straight shaft with screw key.
Optional parts: with oil seal, DC24V brake.
High speed feed series: high speed running when no load.
Complete separation of the main circuit and the control circuit,

Alarm can only turn off the main circuit power supply, easy to maintain SGM7P-15A7AHC2C Manual.
Parameter setting device.
The parameters can be directly entered by the servo drive body.
Saving wiring.
Using a serial encoder, encoder wiring number tthan the original product reduced by 1\/2 SGM7P-15A7AHC2C Manual.
Multi in one control: the use of the parameters of the switch can not use the torque, position, speed control
Related products
Yaskawa
Servo motor with speed reducer
SGM7P-01A7AHC2C
Yaskawa Servo motor with speed reducer SGM7P-01A7AHC2C
SGM7P type rated speed: 3000r\/min of inert
Yaskawa
Servo motor with speed reducer
SGM7P-15A7AHB6C
Yaskawa Servo motor with speed reducer SGM7P-15A7AHB6C
SGM7P type rated speed: 3000r\/min of inert
Yaskawa
Servo motor with speed reducer
SGM7P-15A7AH70C
Yaskawa Servo motor with speed reducer SGM7P-15A7AH70C
SGM7P type rated speed: 3000r\/min of inert
Yaskawa
Medium inertia, flat servo motor
SGM7P-15AFA6S
Yaskawa Medium inertia, flat servo motor SGM7P-15AFA6S
SGM7P type rated speed: 3000r\/min of inert